VELOX building ties
Key advantages
A system of fixing ties with welded crossbars ensuring fixation of board position in outside and inside casing of walls, also serving to lay and join casing boards to each other in horizontal planes of both casings.
• Made by welding from round tow wire of steel 11 343 with the diameter of 4
and 5 mm. They meet the requirement on tensile strength of 540 MPa.
• As a standard, the ties are provided with a finish suitable under plastering
• The width of the ties varies and depends on composition of the used wall
layers
Available ties according to shape and usage:
One side ties – Usually laid in the bottom level of the first layer of casing, at ceiling level, on the inside of supporting walls and when windowsills are built.
Both-side ties – Placed frequently when laying and tieing each board of wall.
Ceiling ties – Placed on the same level as ceiling, the ceiling tie is laid on the peripheral, supporting wall with one end of the tie on inside the casing and the other one on the already drilled holes of connecting boards where it is fixed, with nails, on the end eye.
Tow ties – Run through pre-drilled holes in the center of the end eye of the outside boards and inside boards of casing. The end eye is fixed with nails. When using VELOX WS boards, it is recommended that you use 2 or 3 rows of casing boards so that the strength of the casing will increase during the concreting of the whole floor.
